#HackerEarth: #BattleOfBots 9: Taunt

Problem

Taunt is a two player board game which is played on a 10X4 grid of cells and is played on opposite sides of the game-board. Each player has an allocated color, Orange ( First Player ) or Green ( Second Player ) being conventional. Each player has nine piece in total. The players move their pieces towards to his / her opponent’s area by moving their pieces strategically. Each piece has a different moving feature and is one of the 3 types of pieces.

Piece 1: It can move to horizontally or vertically adjacent cell, if the cell doesn’t contain a piece of same color.

Piece 2: It can move to horizontally adjacent cell or can move two steps forward, if the cell doesn’t contain a piece of same color (except the piece itself).

This type of piece can move to its own position if its in the second last row of the grid and going downward or if its in the second row of the grid and going upward.

Piece 3: It can move two step diagonally in the forward direction, if the cell doesn’t contain a piece of same color (except the piece itself).

This type of piece can move to its own position if its in the second last row of the grid and going downward or if its in the second row of the grid and going upward.

Players take turns involving moves of pieces as mentioned above and can captures opponent’s piece by jumping on or over opponent’s pieces.

Note: Forward direction for first player is downward and for second player is upward.

If a piece (except piece 1) is moving downward and touches the last row, its direction will change i.e. now it will move upward. Similarly, once if a piece (except piece 1) is moving upward and touches the first row, its direction will change i.e. now it will move downward.

Rules:

• Player can only move according to the moves mentioned above.
• A player may not move an opponent’s piece.
• A player can captures opponent’s piece by jumping on or over opponent pieces.

The game will end after 100 moves ( 50 moves for each player ) or when any of the players don’t have any move left. At the end of the game the player with majority of pieces will win.

We will play it on an 10X4 grid. The top left of the grid is [0,0] and the bottom right is [9,3].

Input:
The input will be a 10X4 matrix consisting only of 0,1or2. Next line will contain an integer denoting the total number of moves till the current state of the board. Next line contains an integer – 1 or 2 which is your player id.

In the given matrix, top-left is [0,0] and bottom-right is [9,3]. The y-coordinate increases from left to right, and x-coordinate increases from top to bottom.

A cell is represented by 3 integers.

First integer denotes the player id (1 or 2).
Second integer denotes the type of piece (1, 2 or 3).
Third integer denotes the direction of the piece (0 (upward) or 1 (downward)). When the piece is of first type, direction doesn’t matter as the piece is free to move to horizontally or vertically adjacent cell, if the cell doesn’t contain a piece of same color.

Empty cell is represented by 000.

Output:
In the first line print the coordinates of the cell separated by space, the piece you want to move.
In second line print the coordinates of the cell in which the piece will jump.
You must take care that you don’t print invalid coordinates. For example, [1,1] might be a valid coordinate in the game play if the piece is able to jump to [1,1], but [9,10] will never be. Also if you play an invalid move or your code exceeds the time/memory limit while determining the move, you lose the game.

Starting state
The starting state of the game is the state of the board before the game starts.

131 131 131 121
121 121 111 111
111 000 000 000
000 000 000 000
000 000 000 000
000 000 000 000
000 000 000 000
000 000 000 210
210 210 220 220
220 230 230 230


First Input
This is the input give to the first player at the start of the game.

131 131 131 121
121 121 111 111
111 000 000 000
000 000 000 000
000 000 000 000
000 000 000 000
000 000 000 000
000 000 000 210
210 210 220 220
220 230 230 230
0
1


SAMPLE INPUT
000 000 000 000
000 000 000 111
000 000 111 130
000 000 000 000
000 000 000 000
000 220 000 000
131 000 000 000
121 000 210 000
000 210 131 000
000 210 000 000
58
1
SAMPLE OUTPUT
8 2
8 0


Explanation

This is player 1’s turn, and the player will move the piece at [8,2] and will take two steps diagonally in downward direction and will be at [8,0]
After his/her move the state of game becomes:

000 000 000 000
000 000 000 111
000 000 111 130
000 000 000 000
000 000 000 000
000 220 000 000
131 000 000 000
121 000 210 000
130 210 000 000
000 000 000 000
59
2


Note: Direction of the piece is also changed from 1 to 0 as the piece was moving downward and touches the last row. This state will be fed as input to program of player 2.

Here is the code of the default bot.

Time Limit:1.0 sec(s) for each input file.
Memory Limit:256 MB
Source Limit:1024 KB

Sample Game

Sort a list of tuples by Nth item in Python

Suppose you have a list of tuples that looks something like this:

[('abc', 121),('abc', 231),('abc', 148), ('abc',221)]

And you want to sort this list in ascending order by the integer value inside the tuples.

We can achieve this using the key keyword with sorted().

sorted([('abc', 121),('abc', 231),('abc', 148), ('abc',221)], key=lambda x: x[1])

key should be a function that identifies how to retrieve the comparable element from your data structure. For example, the second element of the tuple, so we access [1].

Source: StackOverflow.com

K random combinations of N elements in List in Java

Given a List of N Strings, generate and print all possible combinations of R elements in array and return X random combinations from the result. Following is the code for implementing it:

HackerRank: Repeated String

Problem

Lilah has a string, s, of lowercase English letters that she repeated infinitely many times.

Given an integer, n, find and print the number of letter a‘s in the first letters of Lilah’s infinite string.

Input Format

The first line contains a single string, s.
The second line contains an integer, n.

Constraints

• 1<=|s|<=100
• 1<=|n|<=10^12
• For 25% of the test cases, n <= 10^6

Output Format

Print a single integer denoting the number of letter a’s in the first letters of the infinite string created by repeating infinitely many times.

aba
10

7

Explanation 0

The first n = 10 letters of the infinite string are abaabaabaa. Because there are 7 a‘s, we print on a new line.

a
1000000000000

1000000000000

Explanation 1

Because all of the first n=1000000000000 letters of the infinite string are a, we print 1000000000000 on a new line.

Design Pattern: Factory Pattern

Factory Pattern is one of the most used design patterns in Java. It is an Creational Pattern, providing one of the best ways to create an object. The pattern enables the code to choose which implementation to call at run time based on arguments provided to the Factory. Thus helping to create generic and maintainable code. The pattern also allows the developer the ease of adding new types of implementations without changing the old code.

In Factory pattern, we create object without exposing the creation logic to the client and refer to newly created object using a common interface.

Implementation

The demo code shown below demonstrates Pizza variations and based on the argument type passed to it, the factory will return the type of Pizza requested for.

For demo purpose, the code only shows for Cheese, Veg and Fresh Pan Pizza only.

Pros and Cons:

Pro’s:

• Allows you to hide implementation of an application seam (the core interfaces that make up your application)
• Allows you to easily test the seam of an application (that is to mock/stub) certain parts of your application so you can build and test the other parts
• Allows you to change the design of your application more readily, this is known as loose coupling

Con’s

• Makes code more difficult to read as all of your code is behind an abstraction that may in turn hide abstractions.
• Can be classed as an anti-pattern when it is incorrectly used, for example some people use it to wire up a whole application when using an IOC container, instead use Dependency Injection.

HackerRank: Circular Array Rotation

Problem

John Watson performs an operation called a right circular rotation on an array of integers, [a(0),a(1).a(2)...a(n-2),a(n-1)]. After performing one right circular rotation operation, the array is transformed from

[a(0),a(1).a(2)...a(n-2),a(n-1)]

to

[a(n-1),a(0),a(1).a(2)...a(n-2)].

Watson performs this operation k times. To test Sherlock’s ability to identify the current element at a particular position in the rotated array, Watson asks q queries, where each query consists of a single integer, m, for which you must print the element at index in the rotated array (i.e., the value of a(m)).

Input Format

The first line contains space-separated integers, n, k, and q, respectively.
The second line contains space-separated integers, where each integer i describes array element a(i)(where 0 <= i <= n).
Each of the q subsequent lines contains a single integer denoting m.

Constraints

• 0 <= i <= 10^5
• 0 <= a(i) <= 10^5
• 0 <= k <= 10^5
• 0 <= q <= 500
• 0 <= m <= N-1

Output Format

For each query, print the value of the element at index m of the rotated array on a new line.

Sample Input
3 2 3
1 2 3
0
1
2

Sample Output
2
3
1


Explanation

After the first rotation, the array becomes [3,1,2].
After the second (and final) rotation, the array becomes [2,3,1].

Let’s refer to the array’s final state as array b. For each query, we just have to print the value of b(m) on a new line:

• m=0 , so we print 2 on a new line.
• m=1 , so we print 3 on a new line.
• m=2 , so we print 1 on a new line.

Problem:

Sample Game

Draughts is a two player board game which is played on a 8X8 grid of cells and is played on opposite sides of the game-board. Each player has an allocated color, Red ( First Player ) or White ( Second Player ) being conventional. Players take turns involving diagonal moves of uniform game pieces in the forward direction only and mandatory captures by jumping over opponent pieces.

Rules:

• Player can only move diagonally to the adjacent cell and in forward direction, if the diagonally adjacent cell is vacant.
• A player may not move an opponent’s piece.
• If the diagonally adjacent cell contains an opponent’s piece, and the cell immediately beyond it is vacant, the opponent’s piece may be captured (and removed from the game) by jumping over it in the forward direction only.
• If a player made a jump, then its mandatory to keep on jumping as long as the jump is possible.
• Player cannot move to the diagonally adjacent cell once the player made a jump.

The game will end when any of the players don’t have any move left. At the end of the game the player with majority of pieces will win.

We will play it on an 8X8 grid. The top left of the grid is [0,0] and the bottom right is [7,7].

Input:
The input will be a 8X8 matrix consisting only of 0o2. Then another line will follow which will contain a number –  1 or 2 which is your player id. In the given matrix, top-left is [0,0] and bottom-right is [7,7]. The x-coordinate increases from left to right, and y-coordinate increases from top to bottom.

The cell marked 0 means it doesn’t contain any stones. The cell marked 1 means it contains first player’s stone which is Red in color. The cell marked 2 means it contains second player’s stone which is white in color.

Output:
In the first line print the coordinates of the cell separated by space, the piece he / she wants to move.
In second line print an integer N, number of steps or jumps the piece will make in one move.
In the next N lines print the coordinates of the cells in which the piece will make jump.
You must take care that you don’t print invalid coordinates. For example, [1,1] might be a valid coordinate in the game play if [1,1] in diagonal to the piece in which is going to jump, but [9,10] will never be. Also if you play an invalid move or your code exceeds the time/memory limit while determining the move, you lose the game.

Starting state
The starting state of the game is the state of the board before the game starts.

0 1 0 1 0 1 0 1
1 0 1 0 1 0 1 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 2 0 2 0 2 0 2
2 0 2 0 2 0 2 0


First Input
This is the input give to the first player at the start of the game.

0 1 0 1 0 1 0 1
1 0 1 0 1 0 1 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 2 0 2 0 2 0 2
2 0 2 0 2 0 2 0
1

SAMPLE INPUT
0 1 0 1 0 1 0 1
1 0 1 0 1 0 0 0
0 0 0 0 0 1 0 0
0 0 0 0 2 0 0 0
0 0 0 0 0 0 0 0
0 0 2 0 0 0 0 0
0 0 0 2 0 0 0 2
2 0 2 0 2 0 2 0
1
SAMPLE OUTPUT
2 5
2
4 3
6 1

Explanation

This is player 1’s turn, and the player will move the piece at [2,5] and will make two jumps. First jump will be at [4,3and second jump will be at [6,1]

After his/her move the state of game becomes:

0 1 0 1 0 1 0 1
1 0 1 0 1 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 1 0 2 0 2 0 2
2 0 2 0 2 0 2 0


This state will be fed as input to program of player 2.

Other valid move for the first player is

2 5
1
3 6


But the following are invalid moves.
Case 1:

2 5
1
4 3


Because after making a jump its possible to jump again and its mandatory to jump as long as its possible to jump.

Case 2:

2 5
2
4 3
5 4


Because after making a jump its invalid to move to diagonally adjacent cell.

Here is the code of the Random Bot.

Time Limit:1.0 sec(s) for each input file.
Memory Limit:256 MB
Source Limit:1024 KB

Solution

This is the solution submitted by me

Problem:

Reversi is a two player board game which is played on a 10 x 10 grid of cells. Each player has an allocated color, Black ( First Player ) or White ( Second Player ) being conventional. Players take turns placing a stone of their color on a single cell. A player must place a stone on the board, in such a position that there exists at least one straight (horizontal, vertical, or diagonal) occupied line between the new stone and another stone of same color, with one or more contiguous other color stone between them.

During a game, any stone of the opponent’s color that are in a straight line and bounded by the stone just placed and another stone of the current player’s color are turned over to the current player’s color. The game will end when the board is completely filled or both the players don’t have any move left. At the end of the game the player with majority of stone will win.

We will play it on an 10 x 10 grid. The top left of the grid is [0,0] and the bottom right is [9,9]. The rule is that a cell[i,j] is connected to any of top, left, right, or bottom cell.

Input:
The input will be a 10 x 10 matrix consisting only of 0,1,2 or 3. Then another line will follow which will contain a number – 1 or 2 which is your player id.

In the given matrix, top-left is [0,0] and bottom-right is [9,9].

In cell[row,column], row increases from top to bottom and column increases from left to right.

The cell marked 0 means it doesn’t contain any stones. The cell marked 1 means it contains first player’s stone which is Black in color. The cell marked 2 means it contains second player’s stone which is white in color. The cell marked 3 means it is a valid place for player whose turn it is.

Output:
Print the coordinates of the cell separated by space, where you want to play your move. You must take care that you don’t print invalid coordinates. For example, [1] might be a valid coordinate in the game play if cell[i,j]=3, but [10] will never be. Also if you play an invalid move or your code exceeds the time/memory limit while determining the move, you lose the game.

Starting state
The starting state of the game is the state of the board before the game starts.

0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 2 1 0 0 0 0
0 0 0 0 1 2 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0


First Input
This is the input give to the first player at the start of the game.

0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 3 0 0 0 0 0
0 0 0 3 2 1 0 0 0 0
0 0 0 0 1 2 3 0 0 0
0 0 0 0 0 3 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
1


Scoring
The scores are calculated by running tournament of all submissions. Your latest submission will be taken into tournament. Scores are assigned according to the Glicko-2 rating system. For more information and questions, see Bot problem judge.

SAMPLE INPUT

0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 3 0 0 0 0 0
0 0 0 3 2 1 3 0 0 0
0 0 0 0 2 2 0 0 0 0
0 0 0 3 1 1 2 3 0 0
0 0 0 1 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
1
SAMPLE OUTPUT
4 3

Explanation

This is player 1’s turn, and the player puts his/her stone in cell[4,3].
After his/her move the state of game becomes:

0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 3 0 3 0 0 0 0
0 0 0 1 1 1 0 0 0 0
0 0 0 3 1 2 0 0 0 0
0 0 0 3 1 1 2 0 0 0
0 0 0 1 0 3 0 0 0 0
0 0 3 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0


This state will be fed as input to program of player 2.

Time Limit:1.0 sec(s) for each input file.
Memory Limit: 256 MB
Source Limit: 1024 KB
Marking Scheme:Marks are awarded if any testcase passes.
Allowed Languages:C, CPP, CLOJURE, CSHARP, D, ERLANG, FSHARP, GO, GROOVY, HASKELL, JAVA, JAVA8, JAVASCRIPT, JAVASCRIPT_NODE, LISP, LISP_SBCL, LUA, OBJECTIVEC, OCAML, OCTAVE, PASCAL, PERL, PHP, PYTHON, PYTHON3, R, RACKET, RUBY, RUST, SCALA, SWIFT, VB

CodeEval: Penultimate Word

Challenge Description:

Write a program which finds the next-to-last word in a string.

Input Sample:

Your program should accept as its first argument a path to a filename. Input example is the following

some line with text
another line

Each line has more than one word.

Output Sample:

Print the next-to-last word in the following way.

with
another

CodeEval: Shortest Repetition

Challenge Description:

Write a program to determine the shortest repetition in a string.
A string is said to have period p if it can be formed by concatenating one or more repetitions of another string of length p. For example, the string “xyzxyzxyzxyz” has period 3, since it is formed by 4 repetitions of the string “xyz”. It also has periods 6 (two repetitions of “xyzxyz”) and 12 (one repetition of “xyzxyzxyzxyz”).

Input Sample:

Your program should accept as its first argument a path to a filename. Each line will contain a string of up to 80 non-blank characters. E.g.

abcabcabcabc
bcbcbcbcbcbcbcbcbcbcbcbcbcbc
dddddddddddddddddddd
adcdefg

Output Sample:

Print out the smallest period of the input string. E.g.

3
2
1
7